Tascam DR-60D MKII Audio Recorder for DSLR

Tascam DR-60D MKII Audio Recorder for DSLR

195,00 EUR

Modell/Artikelnr.: TAS-DR-60DMK2
Lagerstatus: Bitte erfragen Sie unsere Lieferzeit
Stück

Tascam DR-60D MKII

The Tascam DR-60D MKII is a compact 4-track audio recorder for dedicated use with a digital single-lens reflex (DSLR) or digital single-lens mirrorless (DSLM) camera as a video system. It can be mounted directly to the camera and offers various audio inputs and outputs to allow the recording of high-resolution audio material in parallel to, but separated from the camera and its video data.

 

The recorder features Tascam original HDDA microphone preamps which are known for high S/N ratio, low input-referred noise and low distortion. Recordings can be made at 44.1/48/96 kHz, 16/24-bit in WAV or BWF format. In addition to ordinary stereo recording, it is possible to record up to four channels simultaneously which can then be mixed down to a stereo signal. Recording levels can be adjusted independently for inputs 1, 2 and 3–4 and the Dual Recording function allows two files to be recorded in parallel at different levels.

 

The Tascam DR-60D MKII can output high-quality audio to a DSLR/DSLM camera to be recorded there as a reference track, and a camera input enables convenient monitoring of audio sent from a DSLR camera. Mid-side decoding, slate tone functions (automatic/manual), selectable time delay and other functions for convenient recording are also available.

Features at a glance

  • Compact, high-quality audio recorder designed to be used in combination with a DSLR camera
  • Uses an SD/SDHC card as recording medium
  • High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps
  • In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible
  • Four channels can be mixed down to a stereo signal
  • Recording levels can be adjusted independently for inputs 1, 2 and 3–4
  • Dual recording function allows two files to be recorded simultaneously at different levels
  • Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
  • Broadcast Wave Format (BWF) supported as WAV recording format
  • New, smooth XLR/TRS combo jacks
  • XLR mic/line inputs can provide phantom power (+24V/+48V)
  • TRS mic/line inputs support +24 dBu input when used as line inputs
  • "HI+PLUS" setting allows a maximum input gain of 64 dB
  • Stereo mini jack input supports mics that require plug-in power, allowing the input of video mics and other high-output mics (+10 dBV maximum input level)
  • Low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz)
  • High-quality audio can be output to a DSLR camera for recording
  • Two camera outputs with different levels allow audio signal to be sent to a line or mic input of the camera
  • Camera input enables convenient monitoring of audio from a DSLR camera
  • Selectable mid-side decoding for use with MS microphone setups
  • Slate tone functions (automatic/manual) to simplify synchronization with video files when editing
  • Pre-recording function allows the unit to record the two seconds of sound before recording is activated
  • Auto recording function to start start and stop recording by input level
  • A new file can be created during recording (manually or by file size)
  • Self-timer function to start recording after a set period of time
  • Jump-back function allows the last several seconds of the currently played file to be replayed again by simply pressing a button
  • Selectable delay to eliminate time lags caused by differences in the distances of two input sources
  • QUICK button allows easy access to various functions
  • Divide function allows files to be split where desired
  • Mark function convenient for moving to specific locations
  • Equalizers for playback, and level alignment function to enhance the perceived overall sound pressure
  • File name format can be set to use a user-defined word or the date
  • Resume function to memorize the playback position before the unit is turned off
  • Line output and headphones output with individual level controls (3.5-mm jack)
  • 128 x 64 pixel LC display with backlight
  • USB 2.0 port
  • Stand adapter (¼ inch) on bottom side to attach the unit to a tripod
  • DSLR bracket for easy camera attachment and removal with a coin
  • Dedicated remote control jack (for use with RC-10 and RC-3F (sold separately))
  • Hold switch to prevent accidental operation
  • Handles on the front left and right sides protect the screen and can be used to attach a shoulder belt
  • Operates on four AA batteries, an optional AC adaptor (Tascam PS-P520E), optional external battery pack (Tascam BP-6AA) or USB bus power
  • Power source switches automatically from external to internal when necessary (with pop-up message on display)

Specifications

General
Recording media   SD card (64 MB – 2 GB)
SDHC card (4–32 GB)
Audio file compatibility   WAV: 44.1/48/96 kHz, 16/24-bit
BWF (Broadcast Wave Format): 44.1/48/96kHz, 16/24-bit
Number of channels   4 channels (stereo x 2)

 

Analogue audio inputs and outputs
Mic/Line input 1/L, 2/R (switchable phantom power)   XLR-3-31
6.3-mm standard TRS Jack
Input switch set to MIC or MIC+PHANTOM    
Input impedance   2 kΩ
  Phantom Power   48 V ±4 V (10 mA/channel) or
24 V ±4 V (10 mA/channel)
  Maximum input level   0 dBu
  Minimum input level   −72 dBu
  Mic input gain (input level knob at maximum)   LOW: +11 dB
MID: +36 dB
HIGH: +52 dB
HIGH+PLUS: +64 dB
Input switch set to LINE    
Input impedance   10 kΩ or higher
  Nominal input level   +4 dBu
  Maximum input level   +24 dBu
Mic/Line input 3-4 (supports plug-in power)   3.5-mm stereo mini jack
Input impedance   10 kΩ
  Maximum input level   +10 dBV
  Minimum input level   −50 dBV
  Mic input gain (input level knob at maximum)   LOW: +3 dB
HIGH: +26 dB
HIGH+PLUS: +38 dB
CAMERA IN jack   3.5-mm stereo mini jack
Input impedance   10 kΩ
  Nominal input level   −10 dBV
  Maximum input level   +6 dBV
CAMERA OUT (LOW) jack   3.5-mm stereo mini jack
  Output impedance   200 Ω
  Nominal output level   −50 dBV
  Maximum output level   −30 dBV
Headphones output   3.5-mm stereo mini jack
  Maximum output power   50 mW + 50 mW
CAMERA OUT (HIGH)/LINE OUT jack   3.5-mm stereo mini jack
  Output impedance   200 Ω
  Nominal output level   −10 dBV
  Maximum output level   +10 dBV

 

Other inputs and outputs
USB   USB Mini-B Type
  Format   USB 2.0 HIGH SPEED mass storage class
REMOTE jack   2.5-mm TRS jack

 

Audio performance
Frequency response   20 Hz – 20 kHz, +0.5/–2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA)
20 Hz – 40 kHz, +0.5/–3 dB (LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
Distortion   0.02% or less (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
S/N ratio   92 dB or more (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
Equivalent input noise   –120 dBu or less
Note for JEITA   Conforming to JEITA CP-2150

 

Computer compatibility
Windows   Pentium 300 MHz or faster
128 MB or more memory
Mac   Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port   USB 2.0
Recommended USB host controller   Intel chipset
Supported operating systems   Windows XP, Windows Vista, Windows 7, Windows 8 (including Windows 8.1), Mac OS X 10.2 or later

 

Power supply and other specifications
Power supply   Four AA batteries (Alkaline or Ni-MH)
USB bus power supplied from a computer
AC adaptor (TASCAM PS-P515U, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power consumption   5.4 W (maximum)
Dimensions (W × H × D)   133 mm × 93 mm × 78 mm (with the top adapter attached)
Weight   510 g (without batteries)
Operating temperature range   0–40 °C

 

Design and specifications subject to change without notice.

Titel Sorte Größe Herunterladen
DR-60DMK2_RM_EN.pdf PDF 1.98MB Herunterladen

Tags des Produkts

Es wurden keine Tags registriert.

Mine tags

Kunden, die dieses Produkt gekauft haben, haben auch gekauft