Henry Engineering Micromixer

Henry Engineering Micromixer

216,00 EUR

Modell/Artikelnr.: HE-MX

Henry Engineering Micromixer

Four-Input Stereo Mixer


Henry Engineering MicroMixer is a handy mixer to have when you need to mix 2 stereo sources together, or for mixing stereo to mono.


Henry Engineering MicroMixer is a 4-input, 2-output stereo mixer for line-level sources. MicroMixer is a perfect utility mixer with numerous uses: combining 2 stereo sources to a stereo output; combining up to 4 mono sources; mixing mono and stereo sources to a stereo output. Each balanced bridging input will accept a balanced or unbalanced source.


A level control for each input provides adjustment from OFF to +10dB of gain. “MicroAssign” switches permit any input signal to be routed to either the Left, Right, or both outputs. Audio inputs and outpus are on plug-in euroblock connectors.


MicroMixer is 1/3 rack width and can be mounted in an optional rack shelf, or wall mounted with optional wall/cabinet mounting brackets. MicroMixer is powered by an internal AC power supply.



Technical Specifications

  • Input Levels: -10 to +8 dBm

  • Input Impedance: 20K ohms bal, 10K ohms unbal

  • Output Level: +4 dBm nominal, +26 dBm max

  • Output Load: 600 ohms or higher per output, bal

  • Controls: Input gain, Output assign

  • Gain: OFF to +10 dB

  • Frequency Response: DC to 20kHz, 0.25 dB

  • Distortion: <.01% IM/THD

  • Noise: >80 dB below nominal output, typ

  • Power Requirements: 115/230VAC, 50/60Hz, 3 W

  • Construction: Steel enclosure

  • Physical Size: 5.7"w X 1.7"h X 6.0"d, 3lbs

  • Mounting: Table top, optional rack mount shelf, optional wall/cabinet mounting brackets

  • Approval: City of Los Angeles Elect. Test Lab

Titel Sorte Größe Herunterladen
MICROMIXER.pdf PDF 1.19MB Herunterladen

Tags des Produkts

Es wurden keine Tags registriert.

Mine tags