Complete DAB+ Package – turnkey, ready to go on air with 80W RMS / 350W ERP - 1 channel – 1 site:
1 x EuroCaster MUX-01, 1 Channel DAB+ Multiplexer, optional expandable up to 18 channels.
enables different bitrates and bandwidths and is adjustable from 32kbps up to 192 kbps at all possible error protection levels per channel;
has advanced audio encoder profiles available in its settings such as AAC-LC, HE-AAC and HE AAC V2;
has the possibility to set personal preference parameters, but the optimal encoder parameters are automatically suggested for each setting;
encodes multiple sources: AES/EBU, Livewire/AES67, Icecast, Shoutcast and PCM streams in the highest possible audio quality;
provides MOT Slideshow and DLS / SLS services;
is easy to set up via an user friendly menu;
has a multiplexer which provides an EDI stream according the DAB+ ETSI TS 10563 protocol, suitable for the latest DAB+ transmitters; and
has online remote support optional available and future /updates can be installed over the internet;
is available in a 1HU-unit with a clear display which shows basic settings of the performance of the head-end.
1 x EuroCaster 1 channel digital audio encoder
EuroCaster ENC-01 encoder is provided with an analogue audio input as well;
EuroCaster ENC-01 encoder encodes multiple sources: AES/EBU, Livewire/AES67 in the highest possible audio quality;
EuroCaster ENC-01 encoder is available in a 1HU-unit with a clear display which shows basic settings of the performance of the head-end;
has online remote support optional available and future updates can be installed over the internet;
is easy to set up via a user-friendly menu.
In the EuroCaster ENC-01 DAB+ headend AAC+ encoder, different bitrates and bandwidths are adjustable from 32kbps up to 192 kbps at all possible error protection levels per channel. Advanced audio encoder profiles such as AAC-LC, HE-AAC and HE AAC V2 are available in the encoder settings. Although personal preference parameters can be set, the optimal encoder parameters are automatically suggested for each setting.
1 x EuroCaster´s Single channel AIR COOLED VHF Band III transmitter
The TX Series is EuroCasters most amazing achievement, as it combines a complete transmitter with output power up to 150W rms or 250W p.s. and multiple input interfaces in a single 1U 19” rack chassis. This astonishing engineering is today a unique and unequaled solution in the market.
Supporting DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL and NTSC modulations (dual-cast Analog and Digital is also supported), TX-Series natively offers adaptive pre-correction circuits and built in GPS / GLONASS receiver for accurate synchronization and SFN operations.
Whether you need a Terrestrial or Satellite fed transmitter, re-generative repeater, transposer, or even regenerative gap-filler, then TX is the required solution as it can be equipped and configured with different input interfaces (Satellite Receiver, ASI, ETI, EDI, Gigabit Ethernet or RF).
Gap-filling operation is made possible by a powerful echo-canceller and, if necessary, by our award winning Spectrum Restorer regenerative gap-filler (EDOCR).
For the South American ISDB-Tb market, TX-Series combines Satellite Receiver, Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter and up to 130W Transmitter in a single 1U box 19” rack!
Compact 1U 19” Rack chassis
Output Power up to 80W rms in digital or up to 200W p.s. in analogue
High efficiency broadband amplifier technology in VHF bands
DAB/DAB+ modulations fully supported
Adaptive pre-correction circuits
Powerful echo canceller when TX-Series is used as an on-channel repeater
Optional internal demodulator with equalizer for regenerative transposers
Equalized Digital On-Channel Repeater (Spectrum Restorer) configuration available
On-board high stability GPS / GLONASS receiver with battery
Flexible input interfaces:
4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input
2 x ASI inputs and 2 x Gigabit Ethernet
4 x ETI or 2 x ETI + 2 x EDI inputs
1 x RF input
SNMP, Web Interface and Touch Screen display
1 x Antenna system consist of: 4 dipole aluminum antenna system with 7 dB gain including 40 meters of 7/8” feeder cable.
1 x Output filter